The Roll'Service mobile hot-holding cabinet is the essential link between the cooking area and the self-service serving area. Thanks to its programmable humidification function, Roll'Service allows chefs to showcase their talent by ensuring optimal product preservation conditions for impeccable presentation on the plate. Mobile hot-holding cabinets. Constructed of food-grade stainless steel. Rock wool insulation on the walls and door. Integrated touch-sensitive control panel. Fully curved interior with stamped base and runners. Spacing between runners: 71 mm. Solid stainless steel or glass door, 270° opening with a compressible seal. Two side handles and a rear guide bar. Door locking system in the open position. Condensate collection tray on all models except the 5-tier model. Non-marking, shock-resistant perimeter band, except for the 5-tier model equipped with corner bumpers. Four swivel casters, two with brakes: Ø 160 mm with stainless steel housing on GN 2/1 cabinets with 20 levels; Ø 125 mm with polyamide housing on GN 2/1 cabinets with 10 and 15 levels, and GN 1/1 cabinets with 10, 15, and 20 levels; and Ø 80 mm with stainless steel housing on 5-level cabinets. IP25 protection rating, allowing cleaning with a low-pressure jet. NF-Food Hygiene certified. Electric heating system: rear-mounted centrifugal fan with external motor, directing airflow through sealed stainless steel heating elements. Stainless steel air supply and distribution duct. Preset temperature of 85°C; electronic thermostat with digital display allows adjustment from 60 to 85°C. Rapid temperature rise. Heats from 20 to 85°C in 20 minutes. Coiled cord with molded plug for electrical connection, 230V, 50/60 Hz. Ergonomics: generously sized handle with exclusive design. Maintenance: easy access to technical components. Easy handling: 4 swivel casters, 2 with brakes. Non-marking, shock-absorbing perimeter band: protects the cabinet and its surroundings. Simple operation: 2-liter capacity reservoir, accessible from the front, removable. 24-hour autonomy. Temperature uniformity: centrifugal fan. Hygiene: wide radius base and stamped runners. Spacing between runners: 71 mm. Easy loading: 270° opening door. Locking system to keep the door open. Easy access to the control panel: temperature regulation (range from 60°C to 85°C), humidity control (35% to 50%), IP25 protection rating. Two side handles and a rear bar for easy movement.
The Roll'Fresh mobile chilled storage cabinet has been developed for optimal efficiency. It is equipped with a "Hermetic Unit" refrigeration unit located at the bottom with rear ventilation, ensuring the unit's stability while preventing warm air from entering the refrigerated compartment when the door is opened. Easy access to settings: Delayed start option, alarm in case of abnormal temperature rise, and maintenance alert for the unit. Easy loading: 270° opening door. Door locking system in the open position. Two side handles and a rear bar facilitate movement. Practical: Temperature recorder support. Hygienic: Stamped runners. Recessed evaporator located at the top. Maintenance: Refrigeration unit located at the bottom. Lowered center of gravity, removable sides for easy access and cleaning. Non-marking, shock-resistant perimeter band: protects the cabinet and its surroundings. Easy handling: 4 swivel casters, 2 with brakes. Ergonomics: Large, exclusively designed handle. Mobile chilled food holding cabinets. Food-grade stainless steel construction. Fully rounded interior with stamped base and runners. Runner spacing: 71 mm. Solid stainless steel door with 270° opening and a compressible seal. Two side handles and a rear guide bar. Door locking system in the open position. Non-marking, shock-resistant perimeter strip. 4 swivel casters, 2 with brakes: Ø 160 mm with stainless steel housing on the GN 2/1 cabinet and Ø 125 mm with polyamide housing on the GN 1/1 cabinet. IP25 protection rating, allowing low-pressure jet cleaning. Integrated control panel with touch buttons. Refrigeration unit located at the bottom. R455A refrigerant. 230V voltage. Fan-assisted evaporator, air blown from the upper rear with return air from the front ceiling. Defrost water evaporation tray. Cabinet supplied with a support for a temperature recorder (recorder optional).
Stainless steel design Touch control panel on the front of the door Doors with key lock - 180° opening with position holding points Walls with stamped "monoblock" slides - Space between slides 71 mm 2 pre-selected programs depending on the type of recipes ; a Chef mode for specific settings: temperature adjustable from 40°C to 85°C Homogeneous ventilated heating system (1°C maximum gradient) Traceability of information: temperature curves, power cuts, alarms Rapid pre-heating (20° rise) C to 85°C in 7 minutes) Removable condensate collection tray (capacity 2 liters) Programmable delayed start to reduce electrical consumption Side grip handles Spiral connection cord with molded plug and retaining plug on the rear of the cabinet 4 swivel stainless steel castors - Diameter 160 mm - including 2 with brakes
Stainless steel design Touch control panel on the front of the door Doors with key lock - 180° opening with position holding points Walls with stamped "monoblock" slides - Space between slides 71 mm 2 pre-selected programs depending on the type of recipes ; a Chef mode for specific settings: temperature adjustable from 40°C to 85°C Homogeneous ventilated heating system (1°C maximum gradient) Traceability of information: temperature curves, power cuts, alarms Rapid pre-heating (20° rise) C to 85°C in 7 minutes) Removable condensate collection tray (2 liter capacity) Programmable delayed start to reduce electrical consumption Spiral connection cord with molded plug and retaining plug on the rear of the cabinet 4 swivel castors stainless steel - Diameter 80 mm - including 2 with brakes
stainless steel design Touch control panel on the front of the door Doors with key lock - 180° opening with position holding points Walls with stamped "monoblock" slides - Space between slides 71 mm 2 preselected programs according to the typologies of recipes ; a Chef mode for specific settings: temperature adjustable from 40°C to 85°C Homogeneous ventilated heating system (1°C maximum gradient) Traceability of information: temperature curves, power cuts, alarms Rapid pre-heating (20° rise) C to 85°C in 7 minutes) Removable condensate collection tray (capacity 2 liters) Programmable delayed start to reduce electrical consumption Side grip handles Spiral connection cord with molded plug and retaining plug on the rear of the cabinet 4 swivel stainless steel castors - Diameter 125 mm - including 2 with brakes
GN 1/1 ENTRY 325 MM - GN 12
Stainless steel design Touch control panel on the front of the door Doors with key lock - 180° opening with position holding points Walls with stamped "monoblock" slides - Space between slides 71 mm 4 pre-selected programs for optimization of temperature/humidification pairs according to recipe types; a Chef mode for specific settings: temperature adjustable from 40°C to 85°C - Humidification adjustable from 0% to 100% Homogeneous ventilated heating system (1°C maximum gradient). Rapid pre-heating (rise from 20°C to 85°C in 7 minutes) Traceability of information: temperature curves, power cuts, alarms Removable water tank with a capacity of 4 liters Removable condensate collection tray (capacity 2 liters) Delayed start programmable to reduce electrical consumption Side grip handles Spiral connection cord with molded plug and retaining plug on the rear of the cabinet 4 swivel wheels with stainless steel cover - Diameter 125 mm - including 2 with brakes
GN 1/1 ENTRY 530 MM - GN 3
GN 1/1 ENTRY 530 MM - GN 15
GN 1/1 ENTRY 530 MM - GN 20
DUO OPTION - GN 1/1 ENTRY 325 MM - GN 6
Stainless steel design Walls with stamped "monoblock" slides - Space between slides 71 mm Doors with key lock - 180° opening with position holding points Touch control panel on the front of the door Pre-set temperature (setpoint at + 2°C, adjustable from 1°C to +8°C) Homogeneous ventilated refrigeration system (0.5°C maximum gradient) Monobloc refrigeration unit with access from the rear of the cabinet - R290 refrigerant gas Recovery tray removable condensate drain (capacity 2 liters) Programmable delayed start to reduce electrical consumption Traceability of information: temperature curves, power outages, alarms Side grip handles Spiral connection cord with molded plug and retaining plug on the back of the cabinet 4 swivel wheels with stainless steel screed - Diameter 125 mm - including 2 with brakes
GN 2/1 - 2GN40
GN 1/1 - 2GN20